1x serien, mid drive
Denne serie af miniature conveyors har en af de laveste profiler på markedet. Conveyoren er designet til håndtering af små eller lette dele og kan nemt passe ind i maskiner og udstyr.
Med Clean Room Class 100 certificering og FDA godkendt bælte er den ideel til farmaceutiske, medicinske applikationer.
1x serien mid drive
– Flat Belt Mid Drive
– Mid Drive: 1,25″ (32 mm) diameter Center Drive Pulley
– 0,625″ (16 mm) diameter Idler Remskiver
– 0,31″ (8 mm) Diameter nose bar option til en el. begge ender
– FDA-godkendte bælteindstillinger: Lav, medium og høj friktion
– M5 fald i T-Nuts til rådighed
Bredder:
1,75″ (44 mm), 3,75″ (95 mm), 6″ (152 mm), 8″ (203 mm), 10″ (254 mm)
Længder:
10,5″ (268 mm) til 72″ (1829 mm) i 1/8″ (3 mm) intervaller
Belastning: Op til 6,8 kg
Hastighed: Op til 21 m / min
 Profil 01: Lav sideprofil |
 Profil 21: 1″ UHMW høj sideprofil |
 Profil 22: 2″ UHMW høj sideprofil |
 Forskellige sideprofiler |
| Bredde/Width | Længde/Lenght | Varenummer/partnumber | Beskrivelse/describtion |
| 44 | 271 | 1M02E-0089120A010119 | 1100 Series end drive conveyor, 1.75″ (44mm) wide x 0′-10.68″ (271 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 2.07 lbs. (0.9 kg). |
| 44 | 500 | 1M02E-0164120A010119 | 1100 Series end drive conveyor, 1.75″ (44mm) wide x 1′-7.68″ (500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 2.56 lbs. (1.2 kg). |
| 44 | 1000 | 1M02E-0328120A010119 | 1100 Series end drive conveyor, 1.75″ (44mm) wide x 3′-3.36″ (1000 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 3.61 lbs. (1.6 kg). |
| 44 | 1500 | 1M02E-0492120A010119 | 1100 Series end drive conveyor, 1.75″ (44mm) wide x 4′-11.04″ (1500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 4.67 lbs. (2.1 kg). |
| 44 | 1829 | 1M02E-0600120A010119 | 1100 Series end drive conveyor, 1.75″ (44mm) wide x 6′-0″ (1829 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 5.49 lbs. (2.5 kg). |
| 95 | 271 | 1M04E-0089120A010119 | 1100 Series end drive conveyor, 3.75″ (95mm) wide x 0′-10.68″ (271 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 3.03 lbs. (1.4 kg). |
| 95 | 500 | 1M04E-0164120A010119 | 1100 Series end drive conveyor, 3.75″ (95mm) wide x 1′-7.68″ (500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 3.94 lbs. (1.8 kg). |
| 95 | 1000 | 1M04E-0328120A010119 | 1100 Series end drive conveyor, 3.75″ (95mm) wide x 3′-3.36″ (1000 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 5.94 lbs. (2.7 kg). |
| 95 | 1500 | 1M04E-0492120A010119 | 1100 Series end drive conveyor, 3.75″ (95mm) wide x 4′-11.04″ (1500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 7.93 lbs. (3.6 kg). |
| 95 | 1829 | 1M04E-0600120A010119 | 1100 Series end drive conveyor, 3.75″ (95mm) wide x 6′-0″ (1829 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 9.37 lbs. (4.3 kg). |
| 152 | 271 | 1M06E-0089120A010119 | 1100 Series end drive conveyor, 6″ (152mm) wide x 0′-10.68″ (271 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 4.15 lbs. (1.9 kg). |
| 152 | 500 | 1M06E-0164120A010119 | 1100 Series end drive conveyor, 6″ (152mm) wide x 1′-7.68″ (500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 5.57 lbs. (2.5 kg). |
| 152 | 1000 | 1M06E-0328120A010119 | 1100 Series end drive conveyor, 6″ (152mm) wide x 3′-3.36″ (1000 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 8.7 lbs. (3.9 kg). |
| 152 | 1500 | 1M06E-0492120A010119 | 1100 Series end drive conveyor, 6″ (152mm) wide x 4′-11.04″ (1500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 11.81 lbs. (5.4 kg). |
| 152 | 1829 | 1M06E-0600120A010119 | 1100 Series end drive conveyor, 6″ (152mm) wide x 6′-0″ (1829 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 14 lbs. (6.4 kg). |
| 203 | 271 | 1M08E-0089120A010119 | 1100 Series end drive conveyor, 8″ (203mm) wide x 0′-10.68″ (271 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 5.13 lbs. (2.3 kg). |
| 203 | 500 | 1M08E-0164120A010119 | 1100 Series end drive conveyor, 8″ (203mm) wide x 1′-7.68″ (500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 7.03 lbs. (3.2 kg). |
| 203 | 1000 | 1M08E-0328120A010119 | 1100 Series end drive conveyor, 8″ (203mm) wide x 3′-3.36″ (1000 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 11.18 lbs. (5.1 kg). |
| 203 | 1500 | 1M08E-0492120A010119 | 1100 Series end drive conveyor, 8″ (203mm) wide x 4′-11.04″ (1500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 15.31 lbs. (6.9 kg). |
| 203 | 1829 | 1M08E-0600120A010119 | 1100 Series end drive conveyor, 8″ (203mm) wide x 6′-0″ (1829 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 18.16 lbs. (8.2 kg). |
| 254 | 271 | 1M10E-0089120A010119 | 1100 Series end drive conveyor, 10″ (254mm) wide x 0′-10.68″ (271 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 6.08 lbs. (2.8 kg). |
| 254 | 500 | 1M10E-0164120A010119 | 1100 Series end drive conveyor, 10″ (254mm) wide x 1′-7.68″ (500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 8.38 lbs. (3.8 kg). |
| 254 | 1000 | 1M10E-0328120A010119 | 1100 Series end drive conveyor, 10″ (254mm) wide x 3′-3.36″ (1000 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 13.41 lbs. (6.1 kg). |
| 254 | 1500 | 1M10E-0492120A010119 | 1100 Series end drive conveyor, 10″ (254mm) wide x 4′-11.04″ (1500 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 18.44 lbs. (8.4 kg). |
| 254 | 1829 | 1M10E-0600120A010119 | 1100 Series end drive conveyor, 10″ (254mm) wide x 6′-0″ (1829 mm) long with drive shaft in position A. Low side profile on A side and low side profile on D side. Type 19 high friction belt with fused finger splice. Configuration includes standard idler tail and standard end drive tail with short mounting brackets. Uncrated weight = 21.88 lbs. (9.9 kg). |
| Tilbehør/accessories | Beskrivelse/describtion | Billede/picture |
| 1MEBA Documentation p. 4 |
1100 Series end drive bottom mount package, drive is in the A position. Uncrated weight = 2.5 lbs. (1.1 kg). |  |
| 1MESA Documentation p. 4 |
1100 Series end drive side mount package, drive is in the A position. Uncrated weight = 1 lbs. (0.5 kg). |  |
| 11M010PLBDDEN | 1100 Series light load parallel shaft 30W, 24V brushless DC gearmotor. 10:1 gear reduction providing a belt speed of 2.2-65.4 ft/min (.7-19.9 M/min) Uncrated weight = 1.69 lbs. (0.8 kg). |  |
| 11M2DBD-B Documentation p. 9 |
1100 series control board only, 24V DC, 1.25 amp, reversing. Uncrated weight = 0.25 lbs. (0.1 kg). |  |
| Manualer 1100 Series Engineering Manual |
Sider 20 |
Fil størrelse 7.7MB |
| Produktark 1100 Series Brochure Backlit Conveyors |
Sider 4 1 |
Fil størrelse 4.5MB 339KB |
| Litteratur Miniature Conveyors White Paper |
Sider 9 |
Fil størrelse 642KB |
